Product ID:R64-0002 SERIES II LASER TYPE TONER
MSDS Date:03/01/1989
FSC:6850
NIIN:00N033786
MSDS Number: BPTLP

Emergency Phone: 206-767-5323

Info Phone: 206-767-5323

Cage: 0JPG6

Telephone: 206-767-5323

Cage: 0JPG6

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXCESSIVE INHALATION CAN CAUSE
IRRITATION TO THE RESPIRATORY SYSTEM.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINTUES. SKIN: WASH
WITH SOAP AND WATER. INGEST: RINSE MOUTH WITH WATER, CONSULT
PHYSICIAN FOR MEDICAL ADVICE. INHAL: REMOVE TO FRESH AIR. SUPPORT
BRTHG (GIVE O* 2/ARTF RESP) .

Extinguishing Media:FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE.

Spill Release Procedures:REMOVE ANY SOURCE OF IGNITION. MAY BE SWEPT
UP. AVOID DUST INHALATION (USE DUST MASK IF NECESSARY).
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:NONE KNOWN.

Respiratory Protection:NORMALLY NONE REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMALLY NONE REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:0
Spec Gravity:1.5-1.7(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, MILD RESINOUS ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:POSSIBLE CO AND CO*2 DURING THERMAL
DECOMPOSITION.

Waste Disposal Methods:DISPOSE OF MATERIAL IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL GOVERNMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.